Hold the triangle end in front of the pelvic area. Check the height at the back and adjust if needed.
Glue the front in place with prosaide or pax about 1.5 inches down.
Run the glue outwards to glue the edges down well. Carefully go around the whole edge.
Pull the back tight and tack in place at the top. Glue around the edge and 2/3 down the buttocks.
Coat the entire surface front and back with glue. Use Qtip with alchol to fix any folds along edges.
Pull to the side in case of needing to pee!
Strong glue is used. DO NOT just peel the cover of. Be sure to use plenty of skin safe adhesive remover. Let the foam swell up and gently work the cover off with cotton pads or removal brush dipped in remover.